<rp id="0fne2"></rp>

    1. <button id="0fne2"></button><th id="0fne2"><pre id="0fne2"><dl id="0fne2"></dl></pre></th><li id="0fne2"><tr id="0fne2"><u id="0fne2"></u></tr></li><em id="0fne2"><strike id="0fne2"></strike></em>
    2. 秸稈顆粒機廠家帶您了解木屑顆粒機電流忽高忽低的原因

      來源:http://www.fruof.icu 發布時間:2019-07-02 瀏覽次數:
        在生物質木屑顆粒機的日常生產過程中,按照正常的運行和生產電流是相對穩定的,那么為什么電流會突然出現忽高忽低的現象呢?
        In the daily production process of biomass sawdust granulator, according to the normal operation and production current is relatively stable, so why does the current suddenly appear high and low?
        首先,我們來談談生物質木屑顆粒機電流控制的重要性:
        First of all, let's talk about the importance of current control of biomass sawdust granulator.
        每個人都知道高于木屑顆粒機的送料皮帶輸送機必須使用變頻控制,目的是控制進給速度的速度,進給速度控制標準是基于生物質顆粒機判斷安培表,電流控制是根據電動機的額定電流來控制,控制電流的目的是為了實現設備滿負荷運轉。只有在滿負荷運轉時,產量才會最大化。因此,控制鋸末顆粒機的電流是生物質顆粒生產的關鍵。
        Everyone knows that the belt conveyor which is higher than the sawdust granulator must use frequency conversion control. The purpose is to control the feed speed. The feed speed control standard is based on the judgement ammeter of the biomass granulator. The current control is based on the rated current of the motor. The purpose of controlling the current is to realize the full load operation of the equipment. Only when it runs at full load can the output be maximized. Therefore, controlling the current of sawdust granulator is the key to the production of biomass particles.
        秸稈顆粒機廠家帶您了解木屑顆粒機電流忽高忽低的原因:http://www.fruof.icu
        The manufacturer of straw granulator will show you the reason why the current of sawdust granulator is high or low: http://www.fruof.icu
      秸稈顆粒機廠家
        (1)滾子環模間隙調整不當;如果兩根壓力棒與磨削工具之間的間隙大而小,就會產生壓力小而壓力大的壓力棒,就會出現電流不穩定的現象。
        (1) improper adjustment of the clearance between the roller ring die; if the clearance between the two pressure bars and the grinding tool is large and small, the pressure bar with low pressure and high pressure will be produced, and the phenomenon of current instability will occur.
        (2)配料刀磨損嚴重,配料不均勻;如果物料分布不均勻,導致壓桿吃料不均勻,還會引起電流忽大忽小的現象。
        (2) The batching knife is worn seriously and the batching is not uniform; if the material distribution is not uniform, it will lead to the uneven feeding of the pressure bar, and also cause the phenomenon of electric current increasing or decreasing.
        (3)生物質顆粒機進入鐵石后也會出現電流忽高忽低的現象,因為當壓桿旋轉到鐵石的位置時,設備的擠壓壓力引起,造成電流的突然增大。在過去,這個位置之后電流會下降。因此,當電流突然上升或不穩定下降時,必須將設備內的物料擠出,停機檢查。
        (3) When the biomass granulator enters the iron ore, the current will rise or fall suddenly, because when the pressure bar rotates to the position of the iron ore, the extrusion pressure of the equipment will cause the current to increase suddenly. In the past, the current would drop after this position. Therefore, when the current suddenly rises or decreases unsteadily, the material in the equipment must be extruded and stopped for inspection.
        以上就是秸稈顆粒機廠家為您總結的木屑顆粒機電流忽高忽低的原因,想要了解更多內容,歡迎訪問我們網站:http://www.fruof.icu
        This is the reason why the current of the sawdust granulator is high or low. For more information, please visit our website: http://www.fruof.icu.

      上一篇:生物質顆粒機生產廠家質量鑒別規范這些必需看

      下一篇:生物質顆粒機是如何成型的,不理想的緣由是什么?

      福建万千网络科技有限公司配资

      <rp id="0fne2"></rp>

      1. <button id="0fne2"></button><th id="0fne2"><pre id="0fne2"><dl id="0fne2"></dl></pre></th><li id="0fne2"><tr id="0fne2"><u id="0fne2"></u></tr></li><em id="0fne2"><strike id="0fne2"></strike></em>